Wacker Neuson G 70 Manuale dell'Operatore Scaricare il pdf (Pagina 64)

wc_tx003553gb_FM10.fm

Rammer

Maintenance

5.10 Inspecting and Cleaning the Fuel Filter

When

Every year or every 1200 hours (whichever comes first)

Requirements

■ Engine stopped

■ Fuel tank empty

■ Clean, dry, lint-free cloth

■ Replacement fuel filter (as needed)

Procedure

Perform the procedure below to clean the fuel filter.

1. Clamp, then disconnect the fuel hose (b) from the fuel filter (a).

2. Unscrew and remove the fuel filter.

3. Wipe visible sediment or debris from the exterior of the fuel filter screen (c)

using a clean, dry, lint-free cloth.

4. Inspect the fuel filter screen for cracks or damage. Replace the fuel filter if it is

damaged.

5. Re-install the fuel filter.

6. To ensure a proper connection, cut approximately 10 mm (3/8 in.) from the end

of the fuel hose, then connect it to the fuel filter.

7. Check for fuel leaks before restarting the machine.

Result

The fuel filter has now been inspected and cleaned.

10 mm

(3/8 in.)

wc_gr010412

a a

BS xx-2 BS xx-4

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 85 86

Nessun commento

Wacker Neuson G 70 Manuale dell'Operatore Pagina 64